ABRA Auto Body & Glass
Store Locator
Find locations within
miles of
Auto Glass Safety
Because Safety Matters...
 
You and Your Family Deserve ABRA
A vehicle's windshield provides a significant amount of strength to the structural support in the cabin of the vehicle. For instance, in a front-end collision the windshield provides up to 45% of the structural integrity of the cabin of the vehicle, and in a rollover up to 60%*.
Think about that for just a moment. How would you like for over half of the force of a collision to be absorbed by you and your family because your windshield flew out in an accident? Unfortunately, this happens more times than most of us are aware.
…the molding and lower windshield cowl panel should be removed and then the glass is cut out;

…the previous urethane adhesive is removed leaving no more than 1/16" of the original urethane bed;

…scratches on the channel area should be primed to inhibit rust;

…an appropriate urethane adhesive should then be applied to the replacement windshield (free of any body oil or other contaminates) and the windshield installed;

…depending on the type of urethane used, cure times can range from 1 to 8 hours
 
Don't Allow Short Cuts...Because Safety Matters!
* Auto Glass Replacement Safety Standards Council
 
 
  
 

Because sure as your tongue will stick to that flagpole, auto glass primers may not cure properly in cold weather.  And poorly installed windshields could be blown out on impact by your airbag.  That’s why when it’s below 35 degrees, ABRA has a location near you so we can install your glass safely in one of our heated repair centers.

When it comes to quality, ABRA NEVER compromises.  So for windshield repair or replacement, come to the SAFE CHOICE…Come to ABRA!